Cisco 7911G - IP Phone VoIP User Manual

1-13
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Understanding Security Features for Cisco Unified IP Phones
for encryption. For detailed information, refer to the “Configuring Encrypted
Phone Configuration Files” chapter in Cisco Unified Communications Manager
Security Guide.
Table 1-2 shows where you can find additional information about security in this
and other documents.
Table 1-2 Cisco Unified IP Phone Security Topics
Topic Reference
Detailed explanation of security, including set up,
configuration, and troubleshooting information
for Cisco Unified Communications Manager and
Cisco Unified IP Phones
Refer to Cisco Unified Communications Manager
Security Guide.
Security features supported on the Cisco Unified
IP Phone
See the “Overview of Supported Security
Features” section on page 1-15.
Restrictions regarding security features See the “Security Restrictions” section on
page 1-25.
Identifying phone calls for which security is
implemented
See the “Identifying Encrypted and Authenticated
Phone Calls” section on page 1-19.
Transport Layer Security (TLS) connection
• See the “What Networking Protocols Are
Used?” section on page 1-5.
• See the “Understanding Phone Configuration
Files” section on page 2-7.
802.1X authentication for Cisco Unified IP
Phones
See these sections:
• “Supporting 802.1X Authentication on Cisco
Unified IP Phones” section on page 1-23
• “Security Configuration Menu” section on
page 4-38
• “802.1X Authentication and Status” section
on page 4-43
• “Troubleshooting Cisco Unified IP Phone
Security” section on page 9-12
Security and the phone startup process See the “Understanding the Phone Startup
Process” section on page 2-8.

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English