Cisco 7911G - IP Phone VoIP - Page 51

1-33
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
Table 1-7 Checklist for Installing the Cisco Unified IP Phones 7906G and 7911G
Task Purpose For More Information
1. Choose the power source for the
phone:
– Power over Ethernet (PoE)
– External power supply
Determines how the phone
receives power
See the “Providing Power
to the
Cisco Unified IP Phones
7906G and 7911G”
section on page 2-4.
2. Assemble the phone, adjust phone
placement, and connect the network
cable.
Locates and installs the phone
in the network
See the “Installing the
Cisco Unified IP Phone”
section on page 3-9.
See the “Installing the
Cisco Unified IP Phone”
section on page 3-9.
3. Monitor the phone startup process. Verifies that phone is
configured properly
See the “Verifying the
Phone Startup Process”
section on page 3-16.