Cisco 7911G - IP Phone VoIP - Page 84

Chapter 3 Setting Up the Cisco Unified IP Phone
Installing the Cisco Unified IP Phone
3-10
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
4. Connect a Category 3 or 5
straight-through Ethernet
cable from the switch to the
10/100 SW port.
Each Cisco Unified IP Phone
ships with one Ethernet cable in
the box.
See the “Network and Access
Ports” section on page 3-4 for
guidelines.
5. (Cisco Unified IP Phone
7911G only) Connect a
Category 3 or 5
straight-through Ethernet
cable from another network
device, such as a desktop
computer, to the 10/100 PC
port.
Optional. You can connect
another network device later if
you do not connect one now.
See the “Network and Access
Ports” section on page 3-4 for
guidelines.
Procedure Notes Reference