Cisco 7941G Administration Guide

Configuration referenceDescriptionFeature
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter
•
Cisco Unified Communications
Manager Features and Services
Guide, “Barge and Privacy” chapter
Allows a user to join a nonprivate call on a shared phone
line. Barge features include cBarge and Barge.
•
Barge adds a user to a call but does not convert the
call into a conference.
•
cBarge adds a user to a call and converts it into a
conference, allowing the user and other parties to
access conference features.
The phones support Barge in two conference modes:
•
Built-in conference bridge at the target device or the
phone that is being barged. This mode uses the Barge
softkey.
•
Shared conference bridge. This mode uses the cBarge
softkey.
Barge and cBarge
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “External Call Transfer
Restrictions” chapter.
Prevents users from transferring an external call to another
external number.
Block External to External
Transfer
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Presence” chapter.
Allows a user to monitor the call state of a directory
number associated with a speed-dial button, call log, or
directory listing on the phone.
Busy Lamp Field (BLF)
For more information, see Cisco Unified
Communications Manager Feature and
Services Guide, “Call Pickup” chapter.
Provides enhancements to BLF speed dial. Allows you to
configure a Directory Number (DN) that a user can monitor
for incoming calls. When the DN receives an incoming
call, the system alerts the monitoring user, who can then
pick up the call.
Busy Lamp Field (BLF)
Pickup
For more information, see:
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter
•
Cisco Unified Communications
Manager Features and Services
Guide, “Call Back” chapter
Provides users with an audio and visual alert on the phone
when a busy or unavailable party becomes available.
Call Back
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
123
Features, Templates, Services, and Users
Telephony Features Available for Cisco Unified IP Phone

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g