Cisco 7941G

Configuration referenceDescriptionFeature
For more information, see Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Detects and prevents Call Forward All loops. When a Call
Forward All loop is detected, the Call Forward All
configuration is ignored and the call rings through.
Call Forward All loop
breakout
For more information, see Cisco Unified
Communications Manager System Guide,
“Cisco Unified IP Phones” chapter.
Prevents a user from configuring a Call Forward All
destination directly on the phone that creates a Call
Forward All loop or that creates a Call Forward All chain
with more hops than the existing Forward Maximum Hop
Count service parameter allows.
Call Forward All loop
prevention
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
Allows you to specify information that appears on a phone
when a call is forwarded. This information can include the
caller name, caller number, redirected number, and original
dialed number.
Call Forward configurable
display
For more information, see Cisco Unified
Communications Manager System Guide,
“Understanding Directory Numbers”
chapter.
Allows you to override Call Forward All (CFA) in cases
where the CFA target places a call to the CFA initiator.
This feature allows the CFA target to reach the CFA
initiator for important calls. The override works whether
the CFA target phone number is internal or external.
Call Forward all
destination override
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Call Park and Directed
Call Park” chapter.
Allows users to park (temporarily store) a call and then
retrieve the call by using another phone in the Cisco
Unified Communications Manager system.
Call Park
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Call Pickup Configuration”
chapter
Allows users to redirect a call that is ringing on another
phone within their pickup group to their phone.
You can configure an audio or visual alert for the primary
line on the phone. This alert notifies the users that a call
is ringing in their pickup group.
Call Pickup
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
125
Features, Templates, Services, and Users
Telephony Features Available for Cisco Unified IP Phone