Cisco 7941G

Configuration referenceDescriptionFeature
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Monitoring and
Recording” chapter
Allows a supervisor to record an active call. The user may
hear a recording or audible alert tone during a call when
it is being recorded.
When a call is secured, the security status of the call
displays as a lock icon on Cisco Unified IP Phones. The
connected parties may also hear an audible alert tone that
indicates that the call is secured and is being recorded.
When an active call is being monitored or
recorded, you can receive or place intercom calls;
however, if you place an intercom call, the active
call will be put on hold, which causes the
recording session to terminate and the monitoring
session to suspend. To resume the monitoring
session, the party whose call is being monitored
must resume the call.
Note
Call Recording
For more information, see Cisco Unified
Communications Manager System Guide,
“Understanding Directory Numbers”
chapter.
Indicates that a call is coming to the phone while the user
is on a call. The user can answer the call. Information about
the call displays on the phone screen.
Call Waiting
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter
•
Cisco Unified Communications
Manager System Guide,
“Understanding Route Plans” chapter
•
Cisco Unified Communications
Manager Features and Services
Guide, “Call Display Restriction”
chapter
•
Cisco Unified Communications
Manager Administration Guide,
“Directory Number Configuration”
chapter
Displays caller identification such as a phone number,
name, or other descriptive text on the phone screen.
Caller ID
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
126
Features, Templates, Services, and Users
Telephony Features Available for Cisco Unified IP Phone