Cisco 7961G-GE - IP Phone VoIP - HTTP Configuration Menu

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-22
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-15
HTTP Configuration Menu
The HTTP Configuration menu displays the URLs of servers from which the
phone obtains a variety of information. This menu also displays information about
the idle display on the phone.
Table 4-6 describes the options on the HTTP Configuration menu.
Auto Answer
Preferences
Displays a sub-menu that indicates
whether auto answer is enabled (Yes) or
disabled (No) for the each line.
From Cisco Unified
Communications Manager
administration, choose > Call
Routing > Directory Number.
Speed Dials Displays a sub-menu that displays the
lines available on the phone. Select a line
to see the speed dial label and number
assigned to that line.
From Cisco Unified
Communications Manager
Administration,
choose >Device>
Add a New Speed Dial.
Table 4-5 Call Preferences Menu Options (continued)
Option Description To Change
Table 4-6 HTTP Configuration Menu Options
Option Description To Change
Directories URL URL of the server from which the
phone obtains directory information.
From Cisco Unified Communications
Manager administration, choose
>Device>Phone>
Phone Configuration.
Services URL URL of the server from which the
phone obtains Cisco Unified IP Phone
services.
From Cisco Unified Communications
Manager administration, choose
>Device>
Phone > Phone Configuration.