Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-20
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Line Settings Menu
The Line Settings menu displays information that relate to the configurable
parameters for the lines on your SIP phone. Table 4-4 describes the options in this
menu.
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-15
Table 4-4 Line Settings Menu Options
Option Description To Change
Name Displays the number the line uses when
registering.
Use Cisco Unified
Communications Manager
Administration to modify.
Short Name Displays the short name configured for the line. Use Cisco Unified
Communications Manager
Administration to modify.
Authentication Name Displays the name used by the phone for
authentication if a registration is challenged by
the call control server during initialization.
Use Cisco Unified
Communications Manager
Administration to modify.
Display Name Displays the identification the phone uses for
display for caller identification purposes.
Use Cisco Unified
Communications Manager
Administration to modify.
Proxy Address Displays the IP address of the proxy server that
will be used by the phone. This value will
always be set to USECALLMANAGER.
Display only—cannot
configure.
Proxy Port Displays the port number of the proxy server
that will be used by the phone. This value will
always be set to 5060.
Display only—cannot
configure.
Shared Line Displays if the line is part of a shared line (Yes)
or not (No).
Display only—cannot
configure.
To Next Page
Loading...
