8-5
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Device Information
Device Information
The Device Information area on a phone’s web page displays device settings and
related information for the phone. Table 8-1 describes these items.
To display the Device Information area, access the web page for the phone as
described in the “Accessing the Web Page for a Phone” section on page 8-2, and
then click the Device Information hyperlink.
Table 8-1 Device Information Area Items
Item Description
MAC Address Media Access Control (MAC) address of the phone
Host Name Unique, fixed name that is automatically assigned to the phone based on its
MAC address
Phone DN Directory number assigned to the phone
App Load ID Identifier of the firmware running on the phone
Boot Load ID Identifier of the factory-installed load running on the phone
Version Version of the firmware running on the phone
Expansion Module 1 Phone load ID for the first Cisco Unified IP Phone Expansion Module 7914,
if connected to the phone
Expansion Module 2 Phone load ID for the second Cisco Unified IP Phone Expansion Module
7914, if connected to the phone
Hardware Revision Revision value of the phone hardware
Serial Number Serial number of the phone
Model Number Model number of the phone
Message Waiting Indicates if there is a voice message waiting on any line for this phone
To Next Page
Loading...
