Cisco 7961G-GE - IP Phone VoIP

5-29
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 5 Configuring Features, Templates, Services, and Users
Setting Up Services
To configure softkey templates, select Device > Device Settings > Softkey
Templa te from Cisco Unified Communications Manager Administration. To
assign a softkey template to a phone, use the Softkey Template field in the
Cisco Unified Communications Manager Administration Phone Configuration
page. Refer to Cisco Unified Communications Manager Administration Guide,
Cisco Unified Communications Manager System Guide for more information.
Setting Up Services
The Services button on the Cisco Unified IP Phone 7961G/7961G-GE and
7941G/7941G-GE gives users access to Cisco Unified IP Phone Services. You
can also assign services to the programmable buttons on the phone (refer to Cisco
Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Phone Guide for
more information). These services comprise XML applications that enable the
display of interactive content with text and graphics on the phone. Examples of
services include local movie times, stock quotes, and weather reports.
Before a user can access any service,
• You must use Cisco Unified Communications Manager Administration to
configure available services.
• The user must subscribe to services using the Cisco Unified Communications
Manager User Options application. This web-based application provides a
graphical user interface (GUI) for limited, end-user configuration of IP Phone
applications.
Before you set up services, gather the URLs for the sites you want to set up and
verify that users can access those sites from your corporate IP telephony network.
To set up these services, choose Device > Device Settings > Phone Services from
Cisco Unified Communications Manager Administration. Refer to Cisco
Unified Communications Manager Administration Guide and to Cisco Unified
Communications Manager System Guide for more information.
After you configure these services, verify that your users have access to the
Cisco Unified Communications Manager User Options web-based application,
from which they can select and subscribe to configured services. See the “How
Users Subscribe to Services and Configure Phone Features” section on page A-4
for a summary of the information that you must provide to end users.