Cisco 7961G-GE - IP Phone VoIP

3-13
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Adjusting the Placement of the Cisco Unified IP Phone
Adjusting the Placement of the Cisco Unified IP
Phone
The Cisco Unified IP Phone includes an adjustable footstand. When placing the
phone on a desktop surface, you can adjust the tilt height to several different
angles in 7.5 degree increments from flat to 60 degrees. You can also mount these
phones to the wall using the footstand or using the optional locking wall mount
kit.
Adjusting Cisco Unified IP Phone Placement on the Desktop
You can adjust the footstand adjustment plate on the Cisco Unified IP Phone to
the height that provides optimum viewing of the phone screen. See Figure 3-3 for
more information.
Procedure
Step 1 Push in the footstand adjustment button.
Step 2 Adjust the footstand to desired height.
Securing the Phone with a Cable Lock
You can secure the Cisco Unified IP Phone 7961G and 7941G to a desktop using
a laptop cable lock. The lock connects to the security slot on the back of the phone
and the cable can be secured to a desktop.
The security slot can accommodate a lock up to 20 mm. Compatible laptop cable
locks include the Kensington® laptop cable lock and laptop cable locks from
other manufacturers that can fit into the security slot on the back of the phone.
See Figure 3-2.