Cisco 7961G-GE - IP Phone VoIP

4-39
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Network Configuration Menu, page 4-7
Network Configuration Menu
The Network Configuration menu displays device-specific network configuration
settings on the phone
. Table 4-14 describes the options in this menu.
Note The phone also has a Network Configuration menu that you access from the main
menu. For information about the options on that menu, see the “Network
Configuration Menu” section on page 4-7.
Table 4-13 QoS Configuration Menu Options
Option Description To Change
DSCP for Call
Control
Differentiated Services Code Point
(DSCP) IP classification for call
control signaling.
From Cisco Unified Communications
Manager Administration, choose
> System > Enterprise Parameters.
DSCP for
Configuration
DSCP IP classification for any phone
configuration transfer.
From Cisco Unified Communications
Manager Administration, choose
> System > Enterprise Parameters.
DSCP for
Services
DSCP IP classification for phone-based
services.
From Cisco Unified Communications
Manager Administration, choose
> System > Enterprise Parameters.