4-19
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-15
Outbound Proxy Displays the IP address of the outbound
proxy server. This value will always be set
to USECALLMANAGER.
Display only—cannot configure.
Outbound Proxy Port Displays the port number of the outbound
proxy server. This value will always be set
to 5060.
Display only—cannot configure.
NAT Enabled Displays if Network Address Translation
(NAT) is enabled. This value will always
be set to false.
Display only—cannot configure.
NAT Address Displays the WAN IP address of the NAT
or firewall server. This value will always
be set to null.
Display only—cannot configure.
Call Statistics Displays if call statistics are enabled on
the phone.
From Cisco Unified
Communications Manager
administration, choose
>Device>
Device Settings > SIP Profile.
Table 4-3 SIP General Configuration Menu Options (continued)
Option Description To Change
To Next Page
Loading...
