Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-18
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Phone Label Displays the text that is displayed on the
top right status line of the LCD on the
phone. This text is for end-user display
only and has no effect on caller
identification or messaging. This value
will always be set to null.
Display only—cannot configure.
Enable VAD Displays if voice activation detection
(VAD) is enabled.
From Cisco Unified
Communications Manager
administration, choose
>Device>
Device Settings > SIP Profile.
Start Media Port Displays the start Real-Time Transport
Protocol (RTP) range for media.
From Cisco Unified
Communications Manager
administration, choose
>Device>
Device Settings > SIP Profile.
End Media Port Displays the end Real-Time Transport
Protocol (RTP) range for media.
From Cisco Unified
Communications Manager
administration, choose
>Device>
Device Settings > SIP Profile.
Backup Proxy Displays the IP address of the backup
proxy server or gateway. This value will
always be set to USECALLMANAGER.
Display only—cannot configure.
Backup Proxy Port Displays the port number of the backup
proxy server or gateway. This value will
always be set to 5060.
Display only—cannot configure.
Emergency Proxy Displays the IP address of the emergency
proxy server or gateway. This value will
always be set to USECALLMANAGER.
Display only—cannot configure.
Emergency Proxy
Port
Displays the port number of the
emergency proxy server or gateway. This
value will always be set to 5060.
Display only—cannot configure.
Table 4-3 SIP General Configuration Menu Options (continued)
Option Description To Change
To Next Page
Loading...
