Cisco 7961G-GE - IP Phone VoIP

4-27
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Auto Call Select Indicates whether the phone
automatically shifts the call focus to an
incoming call on the same line when
the user is already on a call.
When this option is enabled, the phone
shifts the call focus to the most recent
incoming call.
When this option is disabled, all
automatic focus changes, including
Auto Line Select, are disabled
regardless of their setting.
Default: Enabled
From Cisco Unified Communications
Manager administration, choose
>Device>Phone>
Phone Configuration.
“more” Softkey
Timer
Indicates the number of seconds that
additional softkeys are displayed after
the user presses more. If this timer
expires before the user presses another
softkey, the display reverts to the initial
softkeys.
Range: 5 to 30; 0 represents an infinite
timer.
Default: 5
Access the Phone Configuration page in
Cisco Unified Communications Manager
Administration.
Table 4-9 UI Configuration Menu Options (continued)
Option Description To Change