4-31
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Recording Tone Indicates whether a recording tone (often referred
to as a beep tone) is enabled or disabled for the
phone. If the recording tone option is enabled, the
phone plays the beep tone in both directions of
every call, regardless of whether the call actually
gets recorded. The beep tone first sounds when a
call is answered.
You may want to notify your users if you enable
this option.
Default: Disabled
Related Parameters:
• Recording Tone Local Volume
• Recording Tone Remote Volume
• Recording Tone Duration
Note Other related parameters—Beep tone
frequency in hz, the length of the beep
tone (called duration), and how often the
beep tone plays (called interval)—are
defined on a per-Network Locale basis in
the xml file that defines tones. This xml
file is usually named tones.xml or
g3-tones.xml.
From Cisco Unified
Communications Manager
Administration, choose
>Device>Phone>
Phone Configuration.
Table 4-10 Media Configuration Menu Options (continued)
Option Description To Change
To Next Page
Loading...
