5-7
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Call pickup Allows users to redirect a call that is ringing
on another phone within their pickup group
to their phone.
You can configure an audio and/or visual
alert for the primary line on the phone. This
alert notifies the users that a call is ringing
in their pickup group.
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide, “Call
Pickup Group” chapter.
• Cisco Unified
Communications Manager
Features and Services Guide,
“Call Pickup Group” chapter.
Call Recording Allows a supervisor to record an active call.
The user might hear an intermittent tone
(beep tone) during a call when it is being
recorded.
Note The intercom feature is disabled
when a call is being monitored or
recorded.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, “Monitoring and Record-
ing” chapter.
Call waiting Indicates (and allows users to answer) an
incoming call that rings while on another
call. Displays incoming call information on
the phone screen.
Requires no configuration.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference
To Next Page
Loading...
