Cisco 7961G-GE - IP Phone VoIP

Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
5-12
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Do Not Disturb
(DND)
When DND is turned on, no audible rings
occur during the ringing-in state of a call.
You can configure the phone to have a
softkey template with a DND softkey or a
phone-button template with DND as one of
the selected features.
The following DND-related parameters are
configurable in Cisco Unified
Communications Manager administration:
• Do Not Disturb—This checkbox allows
you to enable DND on a per-phone
basis. Use Cisco Unified
Communications Manager
Administration > Device > Phone >
Phone Configuration.
• DND Incoming Call Alert—Choose the
type of alert to play on a phone for
incoming calls when DND is active.
This parameter is located on both the
Common Phone Profile page and the
Phone configuration page (Phone page
value takes precedence).
• Include DND In BLF Status—Enables
DND status to override busy/idle state.
Cisco Unified Communications
Manager Features and Services
Guide, “Do Not Disturb” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference