Cisco 7961G-GE - IP Phone VoIP

Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
5-14
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Forced
authorization codes
(FAC)
(SCCP phones
only)
Controls the types of calls that certain users
can place.
For more information, refer to:
• Cisco Unified
Communications Manager
System Guide, “Forced
Authorization Codes (FAC)”
chapter.
• Cisco
Unified Communications
Manager Features and
Services Guide, “Client
Matter Codes and Forced
Authorization Codes” chapter.
Group call pickup Allows a user to answer a call ringing on a
phone in another group by using a group
pickup code.
For more information, refer to:
• Cisco Unified
Communications Manager
Administration Guide,
“Pickup Group
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Call Pickup”
chapter.
Hold Allows the user to move a connected call
from an active state to a held state.
• Requires no configuration,
unless you want to use music
on hold. See “Music-on-Hold”
in this table for information.
• See also: “Hold Reversion” in
this table.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference