8-3
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Accessing the Web Page for a Phone
• Network Statistics—Includes the following hyperlinks, which provide
information about network traffic:
–
Ethernet Information—Displays information about Ethernet traffic.
For more information, see the “Network Statistics” section on page 8-11.
–
Access (Port)—Displays information about network traffic to and from
the PC port on the phone. For more information, see the “Network
Statistics” section on page 8-11.
–
Network (Port)—Displays information about network traffic to and
from the network port on the phone. For more information, see the
“Network Statistics” section on page 8-11.
• Device Logs—Includes the following hyperlinks, which provide information
that you can use for troubleshooting:
–
Console Logs—Includes hyperlinks to individual log files. For more
information, see the “Device Logs” section on page 8-13.
–
Core Dumps—Includes hyperlinks to individual dump files. For more
information, see the “Device Logs” section on page 8-13.
–
Status Messages—Displays up to the 10 most recent status messages
that the phone has generated since it was last powered up. For more
information, see the “Device Logs” section on page 8-13.
–
Debug Display—Displays debug messages that might be useful to Cisco
TAC if you require assistance with troubleshooting. For more
information, see the “Device Logs” section on page 8-13.
• Streaming Statistics—Includes the following hyperlinks
–
Stream 1, Stream 2, and Stream 3—Display a variety of streaming
statistics. For more information, see the “Streaming Statistics” section on
page 8-14.
To Next Page
Loading...
