B-1
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
APPENDIX
B
Feature Support by Protocol for Cisco
Unified IP Phone 7961G/7961G-GE and
7941G/7941G-GE
This appendix provides information about feature support for the
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE using the
SCCP or SIP protocol with Cisco Unified Communications Manager Release 6.0.
Table B-1 provides a high-level overview of calling features and their support by
protocol. This table focuses primarily on end-user calling features and is not
intended to represent a comprehensive listing of all available phone features. For
details about user interface differences and feature use, refer to the Cisco
Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE User Guide for Cisco
Unified Communications Manager 6.0.
This guide is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support
_series_home.html
The specific sections that describe the features in the phone user guide are
referenced in Table B-1.
To Next Page
Loading...
