Appendix B Feature Support by Protocol for Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE
B-4
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Client Matter Codes
(CMC)
Supported Not supported “Basic Call Handling—Placing a Call:
Additional Options”
Conference Supported Supported “Basic Call Handling—Making Conference
Calls”
Conference List Supported Supported “Basic Call Handling—Making Conference
Calls”
Computer Telephony
Integration (CTI)
Applications
Supported Some support
(such as Call
Park, WMI)
Users do not interact with this feature
directly. It is configured on Cisco
Communications Manager
Configurable Call
Forward Display
Supported Supported
Directed Call Park Supported Supported “Advanced Call Handling—Storing and
Receiving Parked Calls”
Direct Transfer Supported Not supported
Do Not Disturb
(DND)
Supported Supported “Basic Call Handling—Using Do Not
Disturb”
Distinctive Ring Supported Supported “Using Phone Settings—Customizing
Rings and Message Indicators”
Extension Mobility
Service
Supported Not supported “Advanced Call Handling—Using Cisco
Extension Mobility”
Fast Dial Service Supported Supported “Advanced Call Handling—Speed Dialing”
Forced Authorization
Codes (FAC)
Supported Not supported “Basic Call Handling—Placing a Call:
Additional Options”
Group Call Pickup Supported Supported
Table B-1 Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE Feature Support by
Protocol (continued)
Features
Cisco Unified IP Phones 7961G,
7961G-GE, 7941G, 7941G-GE
For More InformationSCCP SIP
Calling Features