Cisco 7961G-GE - IP Phone VoIP

vii
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Contents
Adding Phones with Cisco Unified Communications Manager
Administration
2-17
Adding Phones with BAT 2-17
Using Cisco Unified IP Phones with Different Protocols 2-18
Converting a New Phone from SCCP to SIP 2-18
Converting an In-Use Phone from SCCP to SIP 2-19
Converting an In-Use Phone from SIP to SCCP 2-19
Deploying a Phone in an SCCP and SIP Environment 2-20
Determining the MAC Address for a Cisco Unified IP Phone 2-20
CHAPTER 3 Setting Up the Cisco Unified IP Phone 3-1
Before You Begin 3-2
Network Requirements 3-2
Cisco Unified Communications Manager Configuration 3-2
Understanding the Cisco Unified IP Phone 7961G/7961G-GE and
7941G/7941G-GE Components
3-3
Network and Access Ports 3-4
Handset 3-4
Speakerphone 3-5
Headset 3-5
Audio Quality Subjective to the User 3-6
Connecting a Headset 3-6
Disabling a Headset 3-6
Using External Devices with Your Cisco Unified IP Phone 3-7
Installing the Cisco Unified IP Phone 3-8
Attaching the Cisco Unified IP Phone Expansion Module 7914 (SCCP Phones
Only)
3-11
Adjusting the Placement of the Cisco Unified IP Phone 3-13
Adjusting Cisco Unified IP Phone Placement on the Desktop 3-13
Securing the Phone with a Cable Lock 3-13