Cisco 8831 - User Options web pages; Sign in and out of User Options web pages

To ChangeDescriptionOption
See, Set SW Port Configuration
Field
Speed and duplex of the network port. Valid
values:
•
Auto Negotiate
•
100 Half: 100-BaseT/half duplex
•
100 Full: 100-BaseT/full duplex
•
10 Half: 10-BaseT/half duplex
•
10 Full: 10-BaseT/full duplex
If the phone is connected to a switch,
configure the port on the switch to the same
speed/duplex as the phone, or configure both
to auto-negotiate.
Network (SW) Port
Setup
Related Topics
Display the Configuration Menu, on page 60
Value input and editing guidelines, on page 61
Network Setup menu, on page 62
Set Domain Name
Procedure
Step 1
Unlock network configuration options.
Step 2
Set the DHCP Enabled option to No.
Step 3
Choose Apps > Admin Settings > Network Configuration > Domain Name.
Step 4
Enter a new domain name.
Step 5
Press Validate, and then press Save.
Related Topics
Unlock and Lock Options
Set DHCP, on page 65
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
63
Cisco Unified IP Conference Phone 8831 settings
Set Domain Name