After the Enable Synchronization from LDAP Server is enabled, you will not be able
to add additional users from Cisco Unified Communications Manager Administration.
Note
For more information on LDAP, see the Cisco Unified Communications Manager System Guide,
“Understanding the Directory”.
•
To add a user and a phone at the same time, choose User Management > User/Phone Add from Cisco
Unified Communications Manager.
User Options web page management
From the User Options web page, users can customize and control several conference phone features and
settings. For detailed information about the User Options web pages, see the Cisco Unified IP Conference
Phone 8831 User Guide for Cisco Unified Communications Manager.
User access to User Options web pages
Before a user can access the User Options web pages, you must use Cisco Unified Communications Manager
Administration to configure the user as an End User. You must also associate appropriate conference phones
with the user, and add the user to a user group. To select and configure an end user, log on to Cisco Unified
Communications Manager Administration and choose User Management > End User. To add a user to a
user group, choose User Management > User Group.
For additional information, see the Cisco Unified Communications Manager Administration Guide, “End User
Configuration” section.
Customize User Options web page display
Most options on the User Options web pages appear by default. However, two options that do not appear by
default are:
•
Ring Settings
•
Line Text Label Settings
You can control the options that appear on the User Options web pages by using enterprise parameter settings
in Cisco Unified Communications Manager Administration.
The settings apply to all User Options web pages at your site.Note
To specify the options that appear on the User Options web pages, follow these steps:
Procedure
Step 1
From Cisco Unified Communications Manager Administration, choose System > Enterprise Parameters.
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
97
Features, templates, services, and user setup
User Options web page management
To Next Page
Loading...
Need help?
General
