Cisco 8831 Administration Guide

Set IP address
Procedure
Step 1
Unlock network configuration options.
Step 2
Set the DHCP Enabled option to No.
Step 3
Choose Apps > Admin Settings > Network Configuration > IP Address.
Step 4
Enter a new IP Address.
Step 5
Press Validate, and then press Save.
Related Topics
Unlock and Lock Options
Set subnet mask
Procedure
Step 1
Unlock network configuration options.
Step 2
Set the DHCP Enabled option to No.
Step 3
Choose Apps > Admin Settings > Network Configuration > IP Subnet Mask.
Step 4
Enter a new IP address for the subnet mask.
Step 5
Press Validate, and then press Save.
Related Topics
Unlock and Lock Options
Set DHCP, on page 65
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager
9.0
66
Cisco Unified IP Conference Phone 8831 settings
Set IP address

Cisco 8831 Specifications

General

Headset Port	No dedicated headset port
Wireless	No
Bluetooth	No
USB Port	No
Video Support	No
Audio	Full-duplex speakerphone
Connectivity	10/100 Ethernet
Power	Power over Ethernet (PoE)
Network Protocols	SIP
Weight	1.1 kg
Audio Codecs	G.711, G.722, G.729, iLBC
Network Ports	2 x Ethernet ports
Security	TLS