Procedure
Step 1
Set the Built In Bridge to On.
Step 2
Set Privacy to Off.
Step 3
Set Recording Option to Selective Call Recording Enabled.
Step 4
Select the appropriate Recording Profile.
Enable Call History for shared line
For more information, see Cisco Unified Communications Manager Administration Guide.
For the purposes of this procedure, all references to a phone, device, or IP Phone apply to the conference
phone.
Note
Procedure
Step 1
Go to Cisco Unified CM Administration and choose Device > Phone.
Step 2
Find your conference phone in the list of phones associated with the Cisco Unified CM.
Step 3
Click on the Device Name of the phone.
The Phone Configuration window appears.
Step 4
Go to Product Specific Configuration Layout area and from the Logging Display drop-down list box, choose
the applicable profile.
The Disabled option is selected by default.
Parameters that you set in the Product Specific Configuration area may also appear in the Device Configuration
window for various devices and in the Enterprise Phone Configuration window.
If you set these same parameters in these other windows as well, the setting that takes precedence is determined
in the following order:
1
Device Configuration window settings
2
Common Phone Profile window settings
3
Enterprise Phone Configuration window settings
Services setup
You can give users access to Cisco Unified IP Phone Services on the Cisco Unified IP Conference Phone.
These services comprise XML applications that enable the display of interactive content with text and graphics
Cisco Unified IP Conference Phone 8831 Administration Guide for Cisco Unified Communications Manager 9.0
95
Features, templates, services, and user setup
Enable Call History for shared line
To Next Page
Loading...
Need help?
General
