View the Wi-Fi Status
You can also view the status from the phone web page by selecting User Login > Advanced > Info > Status >
System Information.
Procedure
Step 1 Press Applications .
Step 2 Select Network configuration > Wi-Fi configuration > Wi-Fi status.
You see the information:
• Wi-Fi status: Displays if the Wi-Fi is connected or disconnected.
• Network name: Indicates the name of the SSID.
• Signal strength: Indicates strength of the network signal.
• MAC address: Indicates MAC address of the phone.
• AP MAC address: Indicates MAC address of the access point (SSID).
• Channel: Indicated the channel on which the Wi-Fi network transmits and receives data.
• Frequency: Indicates the wireless signal frequency band that is used in the Wireless LAN.
• Security mode: Indicates the security mode that is set for the wireless LAN.
View Wi-Fi Status Messages on the Phone
You can view messages about the Wi-Fi connection status of your phone. The messages can help you diagnose
Wi-Fi connection problems. The messages contain:
• connection time and MAC address of the AP
• disconnection time and diagnostic code
• connection failure time
• time that weak signal of the AP continues over 12 seconds
Procedure
Step 1 Press Applications .
Step 2 Select Status > Wi-Fi messages.
Step 3 Use the outer ring of the navigation cluster to scroll through the messages.
Step 4 Press Details to view more details of the selected message.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
324
Cisco IP Phone Installation
View the Wi-Fi Status
To Next Page
Loading...
Need help?
General
