DescriptionParameter
Allows you to enter the password for the specified
Wi-Fi User ID.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Wi-Fi_Password_1_
ua="rw"></Wi-Fi_Password_1_>
• In the phone web page:, enter a password for
the user ID that you have added.
Wi-Fi Password
Allows you to enter password for the network profile
that you create. You need to enter this value when the
security mode is WEP.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<WEP_Key_1_ ua="rw"/>
• In the phone web page:, enter a password for
the network profile that you have created.
WEP Key
Allows you to enter password for the network profile
that you create. You need to enter this value when the
security mode is PSK.
PSK Passphrase
Allows you to select the wireless signal frequency
band that is the WLAN uses.
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<PSK_Passphrase_1_ ua="rw"/>
• In the phone web page:, select one of the
options:
• • Auto
• 2.4 GHz
• 5 GHz
Default: Auto
Frequency Band
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
335
Cisco IP Phone Installation
Wi-Fi Profile (n)
To Next Page
Loading...
Need help?
General
