Cisco Aironet 1100 Series

Contents
vii
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
OL-2851-01
Configuring Transmit and Receive Antennas 7-8
Disabling and Enabling Aironet Extensions 7-9
Configuring the Ethernet Encapsulation Transformation Method 7-10
Enabling and Disabling Reliable Multicast to Workgroup Bridges 7-10
Enabling and Disabling Public Secure Packet Forwarding 7-11
Configuring the Beacon Period and the DTIM 7-12
Configure RTS Threshold and Retries 7-12
Configuring the Maximum Data Retries 7-13
Configuring the Fragmentation Threshold 7-13
CHAPTER 8 Configuring Multiple SSIDs 8-1
Understanding Multiple SSIDs 8-2
Configuring Multiple SSIDs 8-2
Default SSID Configuration 8-3
Creating an SSID 8-3
Using a RADIUS Server to Restrict SSIDs 8-4
CHAPTER 9 Configuring WEP and WEP Features 9-1
Understanding WEP 9-2
Configuring WEP and WEP Features 9-2
Creating WEP Keys 9-3
Enabling and Disabling WEP and Enabling TKIP and MIC 9-3
Enabling and Disabling Broadcast Key Rotation 9-4
CHAPTER 10 Configuring Authentication Types 10-1
Understanding Authentication Types 10-2
Open Authentication to the Access Point 10-2
Shared Key Authentication to the Access Point 10-2
EAP Authentication to the Network 10-3
MAC Address Authentication to the Network 10-5
Combining MAC-Based, EAP, and Open Authentication 10-5
Configuring Authentication Types 10-6
Default Authentication Settings 10-6
Assigning Authentication Types to an SSID 10-6
Configuring Authentication Holdoffs, Timeouts, and Intervals 10-8
Matching Access Point and Client Device Authentication Types 10-9