Cisco ASR 1000 Series Installation And Configuration Guide

Glossary
GL-8
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
SIP
Shared port adapter interface processor. A SIP is a platform-specific carrier card that inserts into a
router slot like a line card. A SIP can hold one or more SPAs in its subslots, depending on the SIP type.
The SPA provides the network interface. The SIP provides the connection between the route processor
(RP1) and the SPA.
SIPBase
sub-package
The sub-package responsible for providing the SPA drivers, the SPA FPGA, and any other software
related to the SPAs.
SIPSPA
sub-package
The sub-package responsible for controlling the SIP operating system and control processes.
SFP
Small form-factor pluggable optical transceiver. A type of fiber optic receptacle device that mounts
flush with the front panel to provide network connectivity.
Single height
Describes the dimension of a SPA that occupies a single SIP subslot or half of the SIP.
Sub-package
A single software file on the Cisco ASR 1000 Series Router. Cisco IOS XE software is released using
consolidated packages, and these consolidated packages contain multiple sub-packages. Each
sub-package has a defined responsibility for running a Cisco ASR 1000 Series Router.
SPA
Shared Port Adapter. A SPA is a modular, platform-independent shared port adapter that inserts into a
subslot of a compatible SIP carrier card to provide network connectivity and increased interface port
density. The SPA provides the interface between the network and the SIP.
SSD
Solid state disk drive.
SSO
Stateful switchover. Action of transitioning from one operational unit to another without loss of
checkpointed state.
STP
Shielded twisted-pair
Subslot
Secondary slot on a SIP where a SPA is installed.
Serial Link
A single transmit and receive serial pair running initially at 1.25Gbits giving a payload of 1.0Gbits,
with future scalability to 3.125 Gbits giving a payload of 2.5 Gbits.
Serial Link
A single transmit and receive serial pair running initially at 1.25Gbits giving a payload of 1.0Gbits,
with future scalability to 3.125 Gbits giving a payload of 2.5 Gbits.
T
Transport map
A configuration option that can be used to provide more granularity related to users accessing a router.
Transport maps can be applied to console ports or to any users accessing a router using telnet or SSH.

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model