Cisco ASR 1000 Series Installation And Configuration Guide

3-9
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation and Initial Configuration Guide
OL-13208-03
Chapter 3 Preparing Your Site for Installation
Site Planning
Table 3-4 shows the weight and dimensions of the Cisco ASR 1000 Series Routers.
The following list describes additional Cisco ASR 1000 Series chassis characteristics:
• Cisco ASR 1006 Router:
– Chassis height meets EIA-310 rack spacing 6RU (10.47/266mm), universal rack mount
– Chassis width meets EIA-310 19inch (17.25/438.15mm) wide with rack brackets
– Cable-management brackets at each Cisco ASR 1000 Series SPA Interface (SIP) locations can
hold 16 ports of STP/UTP RJ 45 cables
– Cable-management brackets allow for 1.5 inch bend radii for cables
– Adjustable rack mount brackets allow for a front to rear rail variance distance of 15.50/394mm
to 19.00/482.6mm
• Cisco ASR 1004 Router:
– Chassis height meets EIA-310 rack spacing 4RU (6.95 in/176.53mm), universal rack mount
– Chassis width meets EIA-310 19inch (17.25/438.15mm) wide with rack brackets
– Cable-management brackets at each Cisco ASR 1000 Series SPA Interface (SIP) locations can
hold 16 ports of STP/UTP RJ 45 cables
– Cable-management brackets allow for 1.5 inch bend radii for cables
– Adjustable rack mount brackets allow for a front to rear rail variance distance of 15.50/394mm
to 19.00/482.6mm
• Cisco ASR 1002 Router:
– Chassis height meets EIA-310 rack spacing 2RU (3.47 in/ 88.138mm), universal rack mount
– Chassis width meets EIA-310 19inch (17.25/438.15mm) wide with rack brackets
– Cable-management brackets at the Cisco ASR 1002 Router location can hold 16 ports of
STP/UTP RJ 45 cables
Ta b l e 3-4 Physical Characteristics of Cisco ASR 1000 Series Router
Characteristic Cisco ASR 1006 Router Cisco ASR 1004 Router Cisco ASR 1002 Router
Height 10.47 in. (26.543 cm) -
6RU rack-mount per EIA
RS-310 standard
6.95 in. (17.653 cm) -
4RU rack-mount per EIA
RS-310 standard
3.47 in. (8.813 cm) - 2RU
rack-mount per EIA RS-310
Width 17.25 in. (43.815 cm) - 19
inch rack-mount
17.25 (43.815 cm) - 19
inch rack-
mount or
optional 23 Telco rack
mount
17.25 in. (43.815 cm) -
19-inch rack-mount or
optional 23 Telco rack
mount
Depth 22.50 in. (57.15 cm)
(including card handles,
cable-management
brackets, power supply
handles).
22.50 in.(57.15 cm)
(including card handles,
cable-management
brackets, and power
supply handles)
22.50 in. (57.15 cm)
(including card handles,
cable-management brackets,
and power supply handles)
for mounting in a
600mm-enclosed cabinet
Weight of fully
configured
chassis
75 lbs (34.019 kg) 50 lbs (22.679 kg) 40 lbs (18.143 kg)

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model