DescriptionSubevent Type
Name of the node that the POSIX process is on.node
POSIX process name for this subevent.procname
POSIX process ID for this subevent.
The three preceding fields describe the
process whose CPU utilization is being
monitored.
Note
pid
If the sec and msec variables are specified as 0 or are
unspecified in the event registration Tcl command
extension, the process CPU utilization is in the latest
sample. If a time window is specified and is greater
than zero in the event registration Tcl command
extension, the averaged process CPU utilization is in
the given time window.
value
If the sec and msec variables are specified as 0 or are
unspecified in the event registration Tcl command
extension, they are both 0. If a time window is
specified and is greater than zero in the event
registration Tcl command extension, the sec and msec
variables are the actual time difference between the
time stamps of the oldest and latest samples in this
time window.
secmsec
For cpu_tot Subevent
"{type %s node {%s} value %u sec %ld msec %ld}"
DescriptionSubevent Type
Type of wdsysmon subevent.type
Name of the node on which the total CPU utilization
is being monitored.
node
If the sec and msec variables are specified as 0 or are
unspecified in the event registration Tcl command
extension, the total CPU utilization is in the latest
sample. If a time window is specified and is greater
than zero in the event registration Tcl command
extension, the averaged total CPU utilization is in the
given time window.
value
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
138
Configuring and Managing Embedded Event Manager Policies
Embedded Event Manager Event Information Tcl Command Extension
To Next Page
Loading...
