Cisco ASR 9000 Serie

SUMMARY STEPS
1.
configure
2.
logging events link-status disable
3.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Disables the logging of link-status syslog messages for software (logical)
and physical links.
logging events link-status disable
Example:
RP/0/RSP0/CPU0:router(config)#
Step 2
•
The logging of link-status syslog messages is enabled by default for
physical links.
logging events link-status disable
•
To enable link-status syslog messages for both physical and logical
links, use the logging events link-status software-interfaces
command.
•
Use the no logging events link-status command to enable link-status
syslog messages on physical links only.
commit
Step 3
Displaying System Logging Messages
This task explains how to display the syslog messages stored in the logging buffer.
The commands can be entered in any order.Note
SUMMARY STEPS
1.
show logging
2.
show logging location node-id
3.
show logging process name
4.
show logging string string
5.
show logging start month day hh:mm:ss
6.
show logging end month day hh:mm:ss
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
303
Implementing Logging Services
Displaying System Logging Messages