Cisco ASR 9000 Serie

PurposeCommand or Action
Sets the severity level that determines which logging events are displayed.
(See Table 2: Alarm Severity Levels for Event Logging , on page 6 under
logging events level severity
Example:
RP/0/RSP0/CPU0:router(config)#
logging events level warnings
Step 5
the Alarm Severity Level and Filtering, on page 6 section for a list of the
severity levels.)
•
Keyword options are as follows: emergencies, alerts, critical, errors,
warnings, notifications, and informational.
•
In this example, messages with a warning (Level 4) severity or greater
are written to the alarm log. Messages of a lesser severity (notifications
and informational messages) are not recorded.
commit
Step 6
(Optional) Displays the size of the logging events buffer (in bytes), percentage
of the buffer that is occupied by alarm-event records, capacity threshold for
show logging events info
Example:
RP/0/RSP0/CPU0:router# show logging
events info
Step 7
reporting alarms, total number of records in the buffer, and severity filter, if
any.
•
This command is used to verify that all settings have been modified
and that the changes have been accepted by the system.
Modifying Logging Correlator Buffer Settings
This task explains how to modify the logging correlator buffer settings.
The size of the logging correlator buffer can be adjusted to accommodate the anticipated volume of incoming
correlated messages. Records can be removed from the buffer by correlation ID, or the buffer can be cleared
of all records.
SUMMARY STEPS
1.
configure
2.
logging correlator buffer-size bytes
3.
exit
4.
show logging correlator info
5.
clear logging correlator delete correlation-id
6.
clear logging correlator delete all-in-buffer
7.
show logging correlator buffer { all-in-buffer [ ruletype [ nonstateful | stateful ]] | [ rulesource [
internal | user ]] | rule-name correlation-rule1...correlation-rule14 | correlationID
correlation-id1..correlation-id14 }
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
19
Implementing and Monitoring Alarms and Alarm Log Correlation
Modifying Logging Correlator Buffer Settings