Cisco ASR 9000 Serie

Configuration Examples for Implementing IP Service Level
Agreements
This section provides these configuration examples:
Configuring IP Service Level Agreements: Example
The following example shows how to configure and schedule a UDP jitter operation:
configure
ipsla
operation 101
type udp jitter
destination address 12.2.0.2
statistics hourly
buckets 5
distribution count 5
distribution interval 1
!
destination port 400
statistics interval 120
buckets 5
!
!
!
schedule operation 101
start-time now
life forever
!
!
show ipsla statistics
Fri Nov 28 16:48:48.286 GMT
Entry number: 101
Modification time: 16:39:36.608 GMT Fri Nov 28 2014
Start time : 16:39:36.633 GMT Fri Nov 28 2014
Number of operations attempted: 10
Number of operations skipped : 0
Current seconds left in Life : Forever
Operational state of entry : Active
Operational frequency(seconds): 60
Connection loss occurred : FALSE
Timeout occurred : FALSE
Latest RTT (milliseconds) : 3
Latest operation start time : 16:48:37.653 GMT Fri Nov 28 2014
Next operation start time : 16:49:37.653 GMT Fri Nov 28 2014
Latest operation return code : OK
RTT Values:
RTTAvg : 3 RTTMin: 3 RTTMax : 4
NumOfRTT: 10 RTTSum: 33 RTTSum2: 111
Packet Loss Values:
PacketLossSD : 0 PacketLossDS : 0
PacketOutOfSequence: 0 PacketMIA : 0
PacketLateArrival : 0 PacketSkipped: 0
Errors : 0 Busies : 0
InvalidTimestamp : 0
Jitter Values :
MinOfPositivesSD: 1 MaxOfPositivesSD: 1
NumOfPositivesSD: 2 SumOfPositivesSD: 2
Sum2PositivesSD : 2
MinOfNegativesSD: 1 MaxOfNegativesSD: 1
NumOfNegativesSD: 1 SumOfNegativesSD: 1
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
280
Implementing IP Service Level Agreements
Configuration Examples for Implementing IP Service Level Agreements