Cisco ASR 9000 Serie

SUMMARY STEPS
1.
configure
2.
logging correlator ruleset ruleset
3.
rulename rulename
4.
commit
5.
show logging correlator ruleset { all | correlation-ruleset1...correlation-ruleset14 } [ detail | summary
]
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Configures a logging correlation rule
set.
logging correlator ruleset ruleset
Example:
RP/0/RSP0/CPU0:router(config)# logging correlator ruleset
ruleset1
Step 2
Configures a rule name.
rulename rulename
Example:
RP/0/RSP0/CPU0:router(config-corr-ruleset)# rulename
stateful_rule
Step 3
commit
Step 4
(Optional) Displays defined correlation
rule sets.
show logging correlator ruleset { all |
correlation-ruleset1...correlation-ruleset14 } [ detail | summary ]
Example:
RP/0/RSP0/CPU0:router# show logging correlator ruleset all
Step 5
Configuring Root-cause and Non-root-cause Alarms
To correlate a root cause to one or more non-root-cause alarms and configure them to a rule, use the rootcause
and nonrootcause commands specified for the correlation rule.
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
11
Implementing and Monitoring Alarms and Alarm Log Correlation
Configuring Root-cause and Non-root-cause Alarms