Cisco ASR 9000 Serie

SUMMARY STEPS
1.
configure
2.
performance-mgmt thresholds {entity | interface {basic-counters |data-rates | generic-counters} type
interface-path-id } {template name } attribute operation value [value2] [percent] [rearm {toggle |
window window-size}]
3.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Creates a PM threshold monitoring template.
performance-mgmt thresholds {entity | interface {basic-counters
|data-rates | generic-counters} type interface-path-id } {template
Step 2
For more detailed information about
creating PM threshold monitoring
templates, see the Guidelines for Creating
PM Threshold Monitoring Templates,
on page 337 section.
Note
name } attribute operation value [value2] [percent] [rearm {toggle
| window window-size}]
Example:
RP/0/RSP0/CPU0:router(config)# performance-mgmt
thresholds node cpu template cpu_thresh1
RP/0/RSP0/CPU0:router(config-threshold-bgp)#
AverageCPUUsed GT 25 percent
commit
Step 3
What to Do Next
After creating a PM threshold monitoring template, you must enable the template to start PM threshold
monitoring. Refer to the Enabling and Disabling PM Threshold Monitoring Templates, on page 357 task for
more information about enabling PM statistics threshold monitoring templates.
Enabling and Disabling PM Threshold Monitoring Templates
This task explains how to enable and disable PM threshold monitoring templates.
Before You Begin
You must create a PM threshold template before performing this task. Refer to Creating PM Threshold
Monitoring Templates, on page 356 tasks for more information.
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
357
Implementing Performance Management
Enabling and Disabling PM Threshold Monitoring Templates