Cisco ASR 9000 Serie

PurposeCommand or Action
Example:
RP/0/RSP0/CPU0:router(config-ipsla-react)# react
Use the timeout keyword to specify a reaction that occurs
if there is a timeout for the monitored operation.
timeout
RP/0/RSP0/CPU0:router(config-ipsla-react-cond)#
commit
Step 4
Configuring Triggers for Verify Error Violations
You can specify a reaction if there is an error verification violation.
SUMMARY STEPS
1.
configure
2.
ipsla reaction operation operation-number
3.
react [verify-error]
4.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Configures certain actions that are based on events under
the control of the IP SLA agent. The operation-number
ipsla reaction operation operation-number
Example:
RP/0/RSP0/CPU0:router(config)# ipsla reaction
operation 432
Step 2
argument is the number of the IP SLA operations for the
reactions that are configured. The range is from 1 to 2048.
Specifies an element to be monitored for a reaction.react [verify-error]
Step 3
Example:
RP/0/RSP0/CPU0:router(config-ipsla-react)# react
Use the verify-error keyword to specify a reaction that
occurs if there is an error verification violation.
verify-error
RP/0/RSP0/CPU0:router(config-ipsla-react-cond)#
commit
Step 4
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
258
Implementing IP Service Level Agreements
Configuring IP SLA Reactions and Threshold Monitoring