Cisco ASR 9000 Serie

PurposeCommand or Action
Displays the current statistics.
show ipsla statistics [operation-number]
Example:
RP/0/RSP0/CPU0:router# show ipsla statistics 432
Step 13
Configuring and Scheduling an ICMP Path-echo Operation with Optional Parameters on the
Source Device
You can enable an ICMP path-echo operation on the source device and configure some optional IP SLA
parameters.
SUMMARY STEPS
1.
configure
2.
ipsla operation operation-number
3.
type icmp path-echo
4.
vrf vrf-name
5.
lsr-path ip-address
6.
destination address ipv4address
7.
frequency seconds
8.
datasize request size
9.
tos number
10.
timeout milliseconds
11.
tag text
12.
lsr-path ipaddress1 {ipaddress2 {... {ipaddress8}}}
13.
exit
14.
ipsla schedule operation op-num
15.
life {forever | seconds}
16.
ageout seconds
17.
recurring
18.
start-time [hh:mm:ss {day | month day} | now | pending | after hh:mm:ss]
19.
commit
20.
show ipsla statistics [operation-number]
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
235
Implementing IP Service Level Agreements
Configuring the ICMP Path-echo Operation