Cisco ASR 9000 Serie

•
sec and msec are the actual time difference between the time stamps of the first total used memory sample
ever collected and the latest total used memory sample.
Set _cerrno
Yes
event_reqinfo_multi
Adds a new function to retrieve the event_reqinfo data for every event that contributed to the triggering of
the script. The data returned will be a list of result strings indexed by event specification tag. Error processing
is the same as in event_reqinfo function.
Syntax
event_reqinfo_multi
Arguments
None
Result String
The following section shows the result string from the event reqinfo multi call:
"<ev-tag> {event_id %u event_type %u event_type_string
{%s} event_pub_sec %ld event_pub_msec %ld timer_type {%s} timer_time_sec
%ld timer_time_msec %ld timer_remain_sec %ld timer_remain_msec %ld}
<ev-tag> {event_id %u event_type %u event_type_string
{%s} event_pub_sec %ld event_pub_msec %ld oid {%s} val {%s} delta_val
{%s} exit_event {%s}}"
Typical usage for a multi-event consisting of both a timer event and an
SNMP event might be:
array set arr_minfo [event_reqinfo_multi]
if {$_cerrno != 0} {
set result [format "component=%s; subsys err=%s; posix err=%s;\n%s" \
$_cerr_sub_num $_cerr_sub_err $_cerr_posix_err $_cerr_str]
error $result
}
array set arr_einfo $arr_minfo(<ev-tag-for-timer-event-spec>)
global timer_type timer_time_sec
set timer_type $arr_einfo(timer_type)
set timer_time_sec $arr_einfo(timer_time_sec)
The output of event_reqinfo_multi is ordered from most recent to least recent event that contributed to the
triggering of the policy.
Embedded Event Manager Event Publish Tcl Command Extension
event_publish appl
Publishes an application-specific event.
Syntax
event_publish sub_system ? type ? [arg1 ?] [arg2 ?] [arg3 ?] [arg4 ?]
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
145
Configuring and Managing Embedded Event Manager Policies
Embedded Event Manager Event Publish Tcl Command Extension