Cisco ASR 9000 Serie

PurposeCommand or Action
Example:
RP/0/RSP0/CPU0:router# show event manager policy
registered system
•
The time-ordered keyword displays information
about currently registered policies sorted by time.
•
The name-ordered keyword displays the policies in
alphabetical order by the policy name.
configure
Step 2
Removes the EEM policy from the configuration, causing
the policy to be unregistered.
no event manager policy policy-name
Example:
RP/0/RSP0/CPU0:router(config)# no event manager
policy tm_cli_cmd.tcl
Step 3
commit
Step 4
—
Repeat Step 1, on page 61to ensure that the policy has
been removed.
Step 5
Suspending EEM Policy Execution
Perform this task to immediately suspend the execution of all EEM policies. Suspending policies, instead of
unregistering them, might be necessary for reasons of temporary performance or security.
SUMMARY STEPS
1.
show event manager policy registered [event-type type] [system | user] [time-ordered | name-ordered
]
2.
configure
3.
event manager scheduler suspend
4.
commit
DETAILED STEPS
PurposeCommand or Action
Displays information about currently registered policies.show event manager policy registered [event-type
type] [system | user] [time-ordered | name-ordered
]
Step 1
•
The event-type keyword displays the registered policies
for a specific event type.
Example:
RP/0/RSP0/CPU0:router# show event manager
policy registered system
•
The time-ordered keyword displays information about
currently registered policies sorted by time.
•
The name-ordered keyword displays the policies in
alphabetical order by the policy name.
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
62
Configuring and Managing Embedded Event Manager Policies
How to Write Embedded Event Manager Policies Using Tcl