Cisco ASR 9000 Serie

PurposeCommand or Action
There is no default
value.
Note
Configures MPLS LSP scan time period value. Range
is 0 to 7200 minutes. Default is 5.
scan period value
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
scan period 60
Step 14
commit
Step 15
Configuring tracking type (rtr)
IPSLA is an ipsla object type. The object tracker tracks the return code of ipsla operation to determine the
track state changes.
SUMMARY STEPS
1.
configure
2.
track track-name
3.
type rtr ipsla operation id reachability
4.
commit
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 1
Enters track configuration mode.
track track-name
Example:
RP/0/RSP0/CPU0:router(config)# track t1
Step 2
Sets the ipsla operation id which needs to be
tracked for reachability.
type rtr ipsla operation id reachability
Example:
RP/0/RSP0/CPU0:routertype rtr 100 reachability
Step 3
commit
Step 4
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
279
Implementing IP Service Level Agreements
Configuring tracking type (rtr)