EasyManua.ls Logo

Cisco ASR 9000 Serie

Cisco ASR 9000 Serie
378 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PurposeCommand or Action
Enables LSP path discovery.path discover
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-ping)#
path discover
Step 6
Configures the interval (in milliseconds) between
MPLS LSP echo requests sent during path discovery.
Range is 0 to 3600000. Default is 0.
echo interval time
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
echo interval 777
Step 7
Configures a local host IP address (127.x.x.x) that is
the maximum selector value to be used during path
discovery. Default is 127.255.255.255.
echo maximum lsp selector ipv4 host address
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
Step 8
echo maximum lsp selector ipv4 host_one
127.100.100.100
Configures the maximum number of selectors sent in
the downstream mapping of an MPLS LSP echo
echo multipath bitmap-size size
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
echo multipath bitmap-size 50
Step 9
request during path discovery. Range is 1 to 256.
Default is 32.
Configures the number of timeout retry attempts for
MPLS LSP echo requests sent during path discovery.
Range is 0 to 10. Default is 3.
echo retry count
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
echo retry 3
Step 10
Configures the timeout value for echo requests during
path discovery. Range is 0 to 3600 in milliseconds.
Default is 5.
echo timeout value
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
echo timeout 300
Step 11
Configures MPLS LSP path retry range. Range is 1 to
16. Default is 1.
path retry range
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
path retry 12
Step 12
Enables secondary frequency for:path secondary frequency {both | connection-loss | timeout}
value}
Step 13
Both timeout and connection loss
Example:
RP/0/RSP0/CPU0:router(config-ipsla-mplslm-lsp-lpd)#
path secondary frequency both 600
Only connection loss
Only timeout
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
278
Implementing IP Service Level Agreements
LSP Path Discovery

Table of Contents

Related product manuals