No Of Instances :2 Byte (e.g 100)
Key Instance :Variable
NoOfSamples: 1 Byte (e.g 10 Samples)
SampleNo : 1 Byte (e.g Sample No 1)
Time Stamp 4 Bytes (Sample Time)
StatCounterName :1 Byte (PeerSessionsEst=1)
StatCounterValue :8 Bytes ( for all counters)
Repeat for Each StatCounterName
Repeat for Each Sample No(Time Interval)
Repeat for All Instances
Repeat for All SubTypes
Repeat for All Entities
Binary File ID Assignments for Entity, Subentity, and StatsCounter Names
This table describes the assignment of various values and keys which is present in the binary file.
Table 36: Binary Format Values and Keys
StatsCountersKeySubentityEntity
See Table 37: Supported
StatsCounters for Entities
and Subentites, on page
330
CPU Key <Node ID>CPU (1)Node (1)
Memory Key <Node ID>Memory (2)
Node Process Key
<NodeProcessID>
Process (3)
Generic Counters Key
<ifName>
Generic Counters (1)Interface (2)
Data Rate Counters Key
<ifName>
Data Rate Counters (2)
Basic Counters Key
<ifName>
Basic Counters (3)
Peer Key <IpAddress>Peer (1)BGP (3)
—
Reserved (1)MPLS (4)
—
Reserved (2)
LDP Session Key
<IpAddress>
LDP (4)
Instance
<process_instance>
v2protocol (1)OSPF (5)
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
329
Implementing Performance Management
PM Statistics Collection Overview