Cisco ASR 9000 Serie

StatsCountersKeySubentityEntity
Instance
<process_instance
v3protocol (2)
<ifName>—The length is variable. The first two bytes contain the size of the Instance ID; this is followed
by the Instance ID string (that is, an Interface name).
<IpAddress>—4 bytes that contain the IP address.
<NodeProcessID>—64-bit Instance ID. The first 32 bits contain the node ID, and the second 32 bits
contain the process ID.
<NodeID>—32-bit instance ID that contains the Node ID.
<process_instance>—The length is variable. The first two bytes contain the size of Instance ID followed
by Instance ID string (that is, a process name).
Note
The numbers in parenthesis (the numbers that are associated with each entity and subentity in Table 36:
Binary Format Values and Keys, on page 329 ) denote the entity and subEntity IDs that are displayed in
the TFTP File.
Note
This table describes the supported statistics counters that are collected in the binary file for entities and
subentities.
Table 37: Supported StatsCounters for Entities and Subentites
StatsCountersSubentityEntity
AverageCPUUsed, NoProcessesCPU (1)Node (1)
CurrMemory, PeakMemoryMemory (2)
PeakMemory, AverageCPUUsed,
NoThreads
Process (3)
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
330
Implementing Performance Management
PM Statistics Collection Overview