SUMMARY STEPS
1.
configure
2.
ipsla
3.
mpls discovery vpn
4.
interval minutes
5.
exit
6.
mpls lsp-monitor
7.
monitor monitor-id
8.
type mpls lsp ping
9.
vrf vrf-name
10.
scan interval scan-interval
11.
scan delete-factor factor-value
12.
timeout milliseconds
13.
datasize request size
14.
lsp selector ipv4 ip-address
15.
force explicit-null
16.
reply dscp dscp-bits
17.
reply mode router-alert
18.
ttl time-to-live
19.
tag text
20.
exp exp-bits
21.
statistics hourly [buckets hours]
22.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Enters IP SLA configuration mode and configures IP
service level agreements.
ipsla
Example:
RP/0/RSP0/CPU0:router(config)# ipsla
Step 2
(Optional) Enters MPLS VPN BGP next-hop neighbor
discovery configuration mode.
mpls discovery vpn
Example:
RP/0/RSP0/CPU0:router(config-ipsla)# mpls discovery vpn
Step 3
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
266
Implementing IP Service Level Agreements
Configuring the MPLS LSP Monitoring Instance on a Source PE Router
To Next Page
Loading...
