Cisco ASR 9000 Serie

PurposeCommand or Action
Use the auto_mkindex command to create the tclIndex file. The
tclIndex file contains a directory of all the procedures contained in
auto_mkindex directory_name *.tcl
Example:
workstation% auto_mkindex eem_library
*.tcl
Step 3
the Tcl library files. We recommend that you run auto_mkindex
inside a directory, because there can be only a single tclIndex file in
any directory and you may have other Tcl files to be grouped together.
Running auto_mkindex in a directory determines which Tcl source
file or files are indexed using a specific tclIndex.
The following sample TclIndex is created when the lib1.tcl and lib2.tcl
files are in a library file directory and the auto_mkindex command
is run:
tclIndex
# Tcl autoload index file, version 2.0
# This file is generated by the "auto_mkindex" command
# and sourced to set up indexing information for one or
# more commands. Typically each line is a command that
# sets an element in the auto_index array, where the
# element name is the name of a command and the value is
# a script that loads the command.
set auto_index(test1) [list source [file join $dir
lib1.tcl]]
set auto_index(test2) [list source [file join $dir
lib1.tcl]]
set auto_index(test3) [list source [file join $dir
lib2.tcl]]
—
Copy the Tcl library files from Step 1, on page
75and the tclIndex file from Step 3, on page 76to
Step 4
the directory used for storing user library files on
the target router.
The directory can be the same directory used in Step 4, on page 76.Copy a user-defined EEM policy file written in
Tcl to the directory used for storing user-defined
EEM policies on the target router.
Step 5
The following example user-defined EEM policy can be used to test
the Tcl library support in EEM:
libtest.tcl
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
global auto_index auto_path
puts [array names auto_index]
if { [catch {test1} result]} {
puts "calling test1 failed result = $result $auto_path"
}
if { [catch {test2} result]} {
puts "calling test2 failed result = $result $auto_path"
}
if { [catch {test3} result]} {
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
76
Configuring and Managing Embedded Event Manager Policies
How to Write Embedded Event Manager Policies Using Tcl