users group
To associate a user group and its privileges with a line, use the users group command in line template
configuration mode. To delete a user group association with a line, use the no form of this command.
users group {usergroup-name| cisco-support| netadmin| operator| root-lr| root-system| sysadmin}
no users group {usergroup-name| cisco-support| netadmin| operator| root-lr| root-system| serviceadmin|
sysadmin}
Syntax Description
Name of the user group. The usergroup-name argument can be only one word.
Spaces and quotation marks are not allowed.
usergroup-name
Specifies that users logging in through the line are given Cisco support
personnel privileges.
cisco-support
Specifies that users logging in through the line are given network administrator
privileges.
netadmin
Specifies that users logging in through the line are given operator privileges.operator
Specifies that users logging in through the line are given root logical router
(LR) privileges.
root-lr
Specifies that users logging in through the line are given root system privileges.root-system
Specifies that users logging in through the line are given service administrator
group privileges.
serviceadmin
Specifies that users logging in through the line are given system administrator
privileges.
sysadmin
Command Default
None
Command Modes
Line template configuration
Command History
ModificationRelease
This command was introduced.Release 2.0
The serviceadmin keyword was added.Release 3.3.0
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 123
Authentication, Authorization, and Accounting Commands
users group
To Next Page
Loading...
Need help?
General
