show mgmt-plane
To display information about the management plane such as type of interface and protocols enabled on the
interface, use the show mgmt-plane command.
show mgmt-plane [inband| out-of-band] [interface type interface-path-id| vrf]
Syntax Description
(Optional) Displays the inband management interface configurations that are the
interfaces that process management packets as well as data-forwarding packets. An
inband management interface is also called a shared management interface.
inband
(Optional) Displays the out-of-band interface configurations. Out-of-band interfaces
are defined by the network operator to specifically receive network management traffic.
out-of-band
(Optional) Displays all the protocols that are allowed in the specified interface.interface
Interface type. For more information, use the question mark (?) online help function.
type
Interface instance. Number range varies depending on interface type.
Use the show interfaces command to see a list of all interfaces currently
configured on the router.
Note
For more information about the syntax for the router, use the question mark (?) online
help function.
interface-path-id
(Optional) Displays the Virtual Private Network (VPN) routing and forwarding
reference of an out-of-band interface.
vrf
Command Default
None
Command Modes
EXEC
Command History
ModificationRelease
This command was introduced.Release 3.5.0
The following modifications were added:
•
Both inband and out-of-band keywords were added.
•
The vrf keyword was added only for out-of-band VRF configurations.
•
Sample output was updated to display inband and out-of-band interface
configurations.
Release 3.6.0
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
OL-24740-01 177
Management Plane Protection Commands
show mgmt-plane
To Next Page
Loading...
Need help?
General
